[
Features |
Specifications |
Press Release |
Buy
]
FirmTek SeriTek/1S2
|
General System Hardware Requirements
|
- PCI based Power Macintosh with available PCI expansion slot
- Compliant 32-bit PCI bus version 2.2
- Available hard drive or peripheral power connector
|
|
Operating Systems Supported
|
- Mac OS 8.xx to Mac OS 9.xx
- Mac OS X version 10.2 or later
|
|
Bus Type
|
- 32 bit, 33/66MHz PCI
- Compliant 32-bit PCI bus version 2.2
|
|
Internal Connectors
|
- 2-port internal Serial ATA interface connectors support up to 2 hard drives
|
|
Drive Types Supported
|
- Serial ATA hard drive
- Backward compatible with Ultra DMA 133/100/66 hard drive*
- Compatibility issues reported with WD 2TB
|
|
ATAPI Device Support
|
|
|
Data Transfer Rates
|
- Up to 150 MBytes/second or 1.5Gbits/second burst data transfer rate
|
|
Drive Modes Supported
|
- Serial ATA
- UltraDMA modes 6/5/4/3/2/1/0, PIO modes 4/3/2/1/0*
|
|
Advanced Data Features
|
- Fully compliant with Serial ATA 1.0a specification
- Bus Mastering off-loads data I/O handling from CPU
- Complete 32-bit CRC error checking, for all bits transmitted (command, data, and status), offers enhanced data protection for high-speed Serial ATA drives
- Dual independent data channels allows for separate device timings
- Automatically identifies and configures drive types*
- Automatically detects and supports devices utilizing many transfer modes including UltraDMA 6/5/43/2/1/0, PIO 4/3/2/1/0*
|
|
Onboard Flash ROM
|
- Allows easy upgrades to the latest firmware
|
|
Cables Supported
|
- 7-pin SATA cable, either end of cable can be connected to the SATA hard drive or to the PCI host adapter
|
|
Warranty
|
- Two year limited parts & labor
|
|
Physical Dimensions
|
- 120mm x 64mm (W x H) Without bracket
|
|
Power Requirements
|
|
|
Environmental
|
- Temperature:
| Operating: |
+5°C to +55°C |
| Non-Operating: |
-25°C to +70°C |
- Relative humidity:
| Operating: |
20% to 80% |
| Non-Operating: |
15% to 90% |
|
|
EMC Compliance
|
- EN55022/1998, EN55024/1998 (European Community)
- FCC Part 15 Class B (US)
- RoHS Compliant
|
* IDE to Serial ATA converter module required for Parallel ATA and
Ultra ATA133/100/66 drives
