|
General System Hardware Requirements
|
- Compatible with PCI and PCI-X to Serial ATA host adapters such as SeriTek/1VE4 and SeriTek/1eVE4
- RAID or non-RAID configurations
|
|
Operating Systems Supported
|
- Operating system independent
- Cross-platform, PC and Macintosh compatible
|
|
Enclosure Capacity
|
- Four 3.5" drive bays
- Hot-swappable
|
|
External Connectors
|
- 4 shielded eSATA Serial ATA receptacles
|
|
Cables Supported
|
- 7-pin shielded eSATA Serial ATA data cable
|
|
Hard Drive Types Supported
|
- 3.5" Serial ATA hard drive
- 1.5 Gbps or 3.0Gbps transfer rate
- Any capacity
|
|
Data Transfer Rates
|
- Up to 300 MBytes/second or 3.0Gbits/second burst data transfer rate per drive
|
|
Advanced Data Features
|
- Fully compliant with Serial ATA 3.0Gbps specification
- Four independent data channels allows for separate device timings
- Individual drive data transfers
- RAID-capable: Compatible with most operating system, software, and host adapter based RAID solutions
- RAID arrays can span across multiple enclosures
|
|
Warranty
|
- One year limited parts & labor
|
|
Enclosure Dimensions
|
- 23.15cm(L) x 18.28cm(H) x 15.68cm(W)
|
|
Enclosure Weight
|
- Enclosure: 4.125Kg (without hard drives)
|
|
Color
|
- Brushed Anodized Aluminum - Silver Grey
|
|
Heat Management System
|
- Aluminum body for maximum durability and heat dissipation
- Two quiet exhaust fans 60x60x10mm
- FAN & TEMP status with LEDs & audible alarm when faulty fan or internal temperature over 55°C
- Mute-able alarm
- Green LED or no audible alarm
- Red LED or Audible alarm
|
|
Power on Self Test (POST)
|
- At power-on, several short beeps and red FAN LED will light indicates the system is performing a self-test
|
|
Status LEDs
|
- Enclosure power on PWR - White
- Enclosure fan status - Red
- Disk drive power on LED on each tray - White
- Disk drive activity LED on each tray - Blue (Not all drives support disk activity LEDs)
|
|
Power Input
|
- 90-230 VAC
- 50-60 Hz
- 150 watts
|
|
Environmental
|
- Temperature: +5°C to internal temperature of +55°C
- Internal temperature fault at +55°C
- Relative humidity:15% to 80% non-condensating
|
|
EMC Compliance
|
- EN55022/1998, EN55024/1998 (European Community)
- FCC Part 15 Class B (US)
|
